Woodworking Golden Rule

Every time you turn on any of your power tools you run the risk of catastrophic harm to your body. This sobering fact is always close to mind in the best woodworkers and other power tool using trades people, and it’s part of what keeps them safe. Furthermore, the safest people in the power tool using community know and follow the seven rules of power tool safety outlined for you below.

This article is not intended to replace the importance of reading the safety instructions in the manual that comes with every power tool… Be careful and be safe.

1) You Are The Most Dangerous Power Tool
Power tool users debate at great length about which is actually the most dangerous power tool. There’s widespread agreement however that the number one most dangerous power tool is the operator himself, as there are very few cases of any power tools leaping out to attack randomly. Remember that every time you turn on a power tool it’s you who are responsible for having the same number of fingers when you turn it off. This may seem like an obvious statement but it’s the arrogant, cocky and negligent power tool users who end up forgetting this cardinal truth.

2) All Tools are Equally Dangerous, but Some are More Frequently Harmful
Every tool in your tool box can be dangerous to you if you forget the cardinal rule, but some are definitely more frequent causes of trips to the emergency room. You should exercise caution especially when you pick up that box cutter of yours to break down some boxes. Also, the table saw is widely considered one of the most frequent manglers of fingers, as is the radial arm saw, the shaper and the chain saw.

3) Keep Your Tools Sharp, True, Clean and Running Smooth
Tool maintenance is another key factor in power tool safety. You should study the manual that comes with all of your power tools to learn how and how often you should be sharpening, aligning and cleaning your tool. And always be on the look out for changes in its operating function – listen for funny noises or any jiggles that may develop. These are signs that you need to spend some time getting your manual out and make some adjustments. A calendar in your shop that you can mark with tool maintenance times is a good idea too.

4) Keep Your Work Space Tidy, Well Lit and Distraction Free
Whether you’re working in your basement shop or a job site it’s vital that you keep it clean, well lit and free from distractions. The cleanliness and tidiness means that you won’t be tripping over any bits and pieces that you’ve left around. Get into the habit of cleaning up after yourself as you work and you’ll be well along your way to preventing any major problems with work-site accidents. Strong lighting too is vital to any power tool operation as the lighting is what keeps your fingers away from the blade and shows you exactly where blades are at all times. Get as many watts as possible on your next job and you’ll keep yourself out of the emergency room. Finally, make sure that there’s no music on that could distract you, or cell phones or anything else that pulls your attention away from where it needs to be.

5) Purchase or Make the Appropriate Safety Accessories
Woodworkers have their push sticks, feather boards and push blocks to make sure that they keep their cuts as true as possible while keeping their fingers away from the blade. Many power tools have common safety accessories and it’s up to you to make sure that you’ve learned as much as you can about each one and that you use it effectively to protect yourself from catastrophic injury.

6) Keep a First Aid Kit Handy
In addition to the normal stuff like bandages and peroxide you’re going to want to keep a couple of extra items handy that have a grizzly importance. Keep a plastic garbage bag handy for transporting any severed limbs with you to the hospital. Further, a hand mirror is vital for checking on your face in the case of a facial injury. Have these items available and hope that you never have to use them.

7) Always Trust Your Instincts
Most power tool operators report a little twinge of conscience right before they get hurt on a power tool. A little voice or feeling that says “hm… this isn’t safe.” If you get that feeling then stop what ever you’re doing right away. Further, it’s often when people try old jobs in new ways – that they just make up on the spot without thinking through – that they get hurt too. So pay attention to that little voice inside of you and you’ll be much more likely to stay safe!

Remember – it’s up to you to keep yourself safe when using power tools. Always read the manuals and remember the seven rules of power tool safety!

About the Author:

At www.ToolCrib.com you can find and compare tools, catch up on the latest topics and debates at the power tool blog and save tons of money on power tools by subscribing via rss or email to our power tool deal of the day.

Article Source: ArticlesBase.com – The Seven Golden Rules of Power Tool Safety

Many people are now disgusted with their stock portfolios. They see they have lost 20 or 30 percent or even more from their investments this year. This brings us to the golden rule of investing:

Invest At Your Own Risk!

People forget this rule until their investments start to lose money. While they are making money, they ignore the risk that is associated with investing. You have to be consciously aware of your investments and how they are doing. Simply setting aside a couple of hours a week to go over your portfolio will allow you to make better decisions and place the control over your risk in your hands.

The choice is simple. Either be actively involved in your investments or stay away from the risk. Put a little bit of elbow grease into it and learn how to invest. Put your pride aside and admit that you can learn more. I have spent countless hours learning and I do quite well week after week. And I still put in that time to understand and analyze the risk and where the stock is moving.

The rewards are great. It’s the difference between making money and losing money. The difference between having control and awareness or losing control and being left in the dark. You can place the blame on whomever you want, but at the end of the day, the cards are in your hands. Learn how and when to play them and eventually you will do quite well. And when you start making that money, keep up with the homework. Otherwise you will lose what you have won.

Learn how to attract love, money, or happiness or all three in YOUR LIFE NOW! Go to http://www.successfulfather.com and SIGN up for the FREE newsletter and BOOKMARK the site and return as often as you can!

You can attract the life that you truly desire! All you have to do is learn HOW!

Bryan Appleton is an investor/entrepreneur who has dedicated himself to teaching others how to achieve their dream life. He is also a proud single father with one son.

Jeremy Broun – the golden rules of woodwork

25 x 1 1/2″ WOODEN KNOBS | BULK LOT CABINET DRAWER HARDWARE PULLS HANDLES CRAFT $12.95

300 WOODEN 1 1/2″ KNOBS LOT | CABINET HARDWARE PULLS | BULK FURNITURE SUPPLIES $39.95

VINTAGE JORGENSEN WOODWORKING ADJUSTABLE WOOD CLAMP $9.99

Wire Brads, 1 Lb 18 Gauge 5/8″ Nails, Woodwork, Crafts $5.99

Hard Maple Lumber Thick 5/4- Flat Sawed Board Clear Face Side $7.00

Hard Maple Lumber, Long, Rift Sawed Board, Clear, White Wood, Top Quality $9.50

Mahogany Lumber Thick 5/4 + Flat Sawed Board Clear Straight Grained $7.25

Red Oak Lumber Inclusions Quarter Rift Sawed Rays Beautiful $9.75

Red Oak Lumber, Instant Antique, Quarter/Rift Sawed Board, Rays End to End $9.25

Red Oak Lumber, Quarter Sawed Board, Flakes End to End, Absolutely Beautiful $7.75

Walnut Lumber, Rustic, Rift/Quarter Rough Sawed Board, Holes, Knots, Inclusions $7.75

White Oak Lumber Rift Sawed Board Clear (Select) Straight Grained Premium $9.75

White Oak Lumber Thick 6/4- Quarter Sawed Board Flakes Premium $9.00

White Oak Lumber, Rift Sawed Board, Straight Grained, Medium Sand Color, Premium $9.00

White Oak Lumber, Rift/Flat Sawed Board, Straight Grained, Instant Antique $9.75

Maple Lumber, Solid Maple Arch, Beautiful Piece $11.33

Drawer Sides, Pine, Routed Bottom Slot, Pack of 10 $15.00

Shelf Board, Project Wood, Thick Pine, Light Color $7.21

Table Top, Oval Shape, Unfinished Frame $20.00

PSI Woodworking D50C 4-Inch by 50-Feet Clear Flexible Dust Collection Hose $7.17

12 PC SET,CAST IRON,LONGHORN,DRAWER PULLS,WOODWORKING,FURNITURE REFINISHING $19.98

Rail Cap, Soft Maple, Curved, Clear, Straight Grained $9.25

1000 1/2″ , 3/4″ OR 1″ PAN HEAD WASHER POCKET SCREWS~WOODWORKING $9.99

Brainerd 9715 Solid Brass Broad Hinges (Furniture/Cabinets/Crafts/Woodwork) $6.75

Stanley 74-4200 Satin Brass Finish Cabinet Hinges (Furniture/Crafts/Woodwork) $6.25

Brainerd 18XC Solid Brass Hinges (Furniture/Crafts/Cabinets/Woodwork) $7.50

National V485 Cabinet Hinges 1-1/4 Nickel Finish (Furniture/Crafts/Woodwork) $6.50

Stanley 72-4900 Ornamental 2 Cabinet Hinges (Furniture/Crafts/Woodwork) $6.75

Brainerd Solid Brass 2 Cabinet Hinges (Furniture/Crafts/Woodwork) $7.25

Stanley 72-2800 Ornamental Cabinet Hinges (Furniture/Crafts/Woodwork) $6.75

FLAT HEAD WOOD SCREWS~FURNITURE HARDWARE~WOODWORKING $8.50

Cherry Lumber, Thick 6/4-, Quarter Sawed Board, Straight Grained, Top Quality $7.75

Hard Maple Lumber, Flat Sawed Board, Clear, Medium Textured, Beautiful $7.75

Hard Maple Lumber, Flat Sawed Board, Clear, Straight Even Grained, Top Quality $9.00

Hard Maple Lumber, Flat Sawed Board, Clear, Straight Grained, Beautiful $8.50

Hard Maple Lumber, Thick 6/4, Clear, Rift Sawed Board, Excellent Quality $8.75

Red Oak Lumber, Flat Sawed Board, Top Quality, Premium Pennsylvania Appalachian $9.75

Red Oak Lumber, Instant Antique, Quarter Sawed Board, Flakes, Beautiful $7.25

Walnut Lumber, Square Stock Board, Turning Wood, Clear, Straight Even Grained $9.75

White Oak Lumber, Premium Flat Sawed Board, Clear, Straight Grained, Top Quality $7.50

White Oak Lumber, Thick 5/4+, Quarter Sawed Board, Nicely Flaked, Excellent $8.00

Drawer End, Pack of 10, 7/16″ Thick $12.50

Drawer Divider, End, Side, Solid Maple, Pack of 10 $12.50

Cabinet Door, Maple, Arched Top, Maple Construction $14.00

Craftsman Building/Woodworking Plans 125 Blueprints-New $0.99

SALE 40 Threaded Woodworking Zinc 1/4-20 Inserts,Crafts $5.85

12 pcs Brass Plated Cup Hook-9/16 hole, 1-3/8 long $4.99

Prefinished Antique Reclaimed Oak Flooring – Distressed Grade $12.95

lot of 14 or 16 vintage oak 2×6 lumber approx 12 to 16 foot long $50.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $8.50

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $8.50

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $8.50

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $8.50

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.75

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

NIBSBURNER PYROGRAPHY TIPS — BEAUTIFY YOUR WORLD! $7.00

brass handel pulls knobs metal furniture woodwork 1020A $4.95

brass handel pulls knobs metal furniture woodwork 1145 $4.95

brass handel pulls knobs metal furniture woodwork 1303 $4.95

Handel pulls knobs metal furniture woodwork 497X $4.95

Vintage 1952 Deltagram Nov/Dec Woodworking Delta Power Tool Rockwell Manuf.Co $9.99

Poplar Lumber, Tulip, Thick 8/4-, Flat Sawed Board, Clear, Straight Grained $3.93

Sycamore Lumber, Thick 5/4+ Board, Quarter/Rift Sawed, Rays, Clear, Beautiful $4.23

Vintage July/August 1952 Deltagram Woodworking booklet, Delta Power Tool $9.99

Vintage Sept/Oct 1952 Deltagram, Delta Power Tool Division, Rockwell woodworking $9.99

Vintage Deltagram Woodworking Booklet March/April 1952 Rockwell Delta Powertools $9.99

Vintage Deltagram 1952 Jan/Feb Woodworking Rockwell Manufacturing Milwaukee $9.99

Vintage 1953 Deltagram Woodworking booklet Jan/Feb issue Volume 22 Pittsburgh PA $9.99

Desk furniture Grommets, Qty 75, bulk, white, tan, black; woodworking $75.00

Children’s Boat with Trundle Bed Woodworking Plans $19.95

CONTOUR GAGE 6” GENERAL TOOL DESIGN GUAGE WOODWORKING $9.65

Hard Maple Lumber Thick 5/4 Flat Sawed Board Clear Straight Grained Premium $7.25

Mahogany Lumber Thick 8/4- Quarter Sawed Board Rays Clear Super Good One $9.75

Red Pine Lumber Rustic Quarter Sawed Board Soft Textured Beautiful $9.50

Red Oak Lumber Super Wide Board Flat Sawed Light Curl Clear Excellent $9.50

Alder Lumber Thick 8/4- Flat Sawed Board Clear Straight Grain Superior Grade $4.00

Walnut Lumber Thick 8/4- Quarter Rift Sawed Board Clear Rich Color Premium $5.00