Woodworking Electric Tools

————Frequently Asked Question————
Does any know of a reputable source In the Milwaukee area that can appraise old woodworking machines.?

I have an old Walker Turner 6″ Jointer that I need to part with. I have been in the cabinet making biz for 27 years but I cannot find any info on this particular tool. It is belt driven and is powered by a Craftsman 3/4 horse electric motor.

I don’t know of an appraiser, but I did a bit of looking online and it looks like other similar ones sell for about $200-$300

————————————————

When they first appeared years ago, impact drivers were all the rage in Japan but it took a while for Americans to realize what a terrific advantage impact drivers have over an electric drill when it comes to driving long screws into lumber, especially decking. American companies like Porter Cable grasped the idea and started competing with impact drivers offered by overseas companies. The idea of impact drivers was begun long ago with the inventions of (1) the impact wrench, used in every automotive garage, and (2) the hammer drill used to power masonry bits into concrete and other extremely hard materials.

The mechanism that allows them to do this is sometimes referred to as “hammer and anvil” meaning that, unlike the simple twisting action of an electric drill, the impact driver literally knocks the screwdriver bit around as if being repeatedly being whacked by a hammer. This action gives these woodworking tools considerable power that simply would not be possible if the exact same screwdriver bit were chucked up in an electric drill with the same size motor and battery. An extra advantage is that there are hex shank drill bits available so that your impact driver can double as a quick-change cordless drill thus becoming one of your most useful woodworking tools.

The first time I picked up an impact driver, a 12-volt Makita, I thought it appeared to be a toy. I then tried it out by driving a 3-inch deck screw into a 4 x 4 piece of fir. I was surprised as I watched (and felt) the tiny machine effortlessly drive the screw home, sinking the head under the face of the wood. I had to remember to keep a lot of hand pressure against the tool so that the screw driver bit did not pop out of the screw head and ruin it. From that day forward, I have never been without one of these amazing devices at my side

Over the years, these drivers have been improved to the point of near perfection and this includes the batteries that power them. Battery voltage has grown from 9.6 volts to 18 volts and more. More than that, battery life has been greatly extended from what it was with the emergence of Lithium Ion technology and subsequent enhancements on that. In fact, a large part of the price tag of any impact driver, whether it comes from Makita Tools, Bosch or Dewalt is the battery or batteries that come with it.

You may have noticed that most manufacturers of cordless woodworking tools have started selling so-called “bare tool bodies” meaning that they come with no battery or charger included and a greatly reduced price tag. The reason for this is that most makers (but not all) have discovered that if they make all their tools run on one 18-volt Lithium Ion battery, they can sell more bare tool bodies while locking in their customer to their brand name. Regular buyers love this because they do not have to keep laying out hard-earned dollars for shelves full of different batteries and chargers but, instead, can just buy the bare machines that share the same battery.

Several manufacturers like Makita Tools have included two or more speed ranges in their impact drivers. Sometimes, too much power is not always an advantage. You can demolish small screw heads and snap off screw shafts. The more power used, the less battery life. Just because you have a 400 HP motor under the hood of your car does not mean that you drive around town with the accelerator pedal to the floor.

While a 12 or 14.4 volt impact driver will meet your requirements for most jobs, an 18 volt model is well worth the small increase in price.

Bob Gillespie Woodworker IMPACT DRIVER REVIEWS: http://www.perfectwoodworking.com/impactdriversreview/ WOODWORKING TOOL REVIEWS: http://www.perfectwoodworking.com/woodworkingtoolreviews/ © 2010 Robert M. Gillespie, Jr.

Trademark Electric Jigsaw $31.08 Take your cutting precision to another level with the Trademark Tools jigsaw. With this electric jigsaw you can cut intricate patterns and improve your wood working skills.

The Workshop Book (Paperback) $21.24 A systematic approach to common problems: storage for tools, heat, light, electricity, dust collection, and personal safety.

Physical Hazard Control (Hardcover) $27.9 “The book explains the proper controls for many types of physical hazards, including layout and building design, safeguarding of machinery, confined space entry, noise, radiation, ergonomics, electricity, thermal stressors, hand tools, woodworking, wel…

12″ Miter Saw Single Level Bevel Adjustment-Milwaukee ToolTV

2 Hager Flush Door Cabinet Hinges Antique Bronze Screws Hardware Woodworking New $4.99

4 New Beautiful Cabinet Maple Wood Samples for Woodworking & Craft Projects $20.00

2 WOODWORKING BOOKS “COMPLETE WOODWORKER” & “PRACTICAL WOODWORKER” BERNARD JONES $2.99

Basswood Lumber, Thick 6/4-, Super Wide Board, Top Quality Carving Wood, Clear $9.00

Cherry Lumber, Long, Thick, Curly, Rift/Flat Sawed Board, Clear, Beautiful $9.75

Hard Maple Lumber, Square Stock Board, Turning Wood, Clear, Top Quality $8.25

Hard Maple Lumber, Thick 6/4+, Premium Flat Sawed Board, Clear, Straight Grained $9.00

Hard Maple Lumber, Thick 6/4-, Flat Sawed Board, Clear, Excellent Quality $9.50

Poplar Lumber, Tulip, Thick 8/4-, Flat Sawed Board, Clear, Top Quality $8.50

Red Oak Lumber, Flat Sawed Board, Straight Grained, Excellent Quality, Beautiful $9.25

Red Oak Lumber, Quarter Sawed Board, Super Good One, Light Red Color, Flakes $9.75

White Oak Lumber, Thick 6/4-, Quarter/Rift Sawed Board, Clear, Super Good One $8.00

White Oak Lumber, Thick 8/4 Board, Quarter Sawed, Flakes, Super Good One $6.75

Shelf Board, Maple, Solid Wood Construction, Unfinished $4.75

Woodworking & Furniture Building CD – 3 books of plans $6.99

20, FLEUR DE LIS, DRAWER PULLS, METAL, NEW ORLEANS,WOOD WORKING, CABINETRY,NEW $24.98

Craftsman Building/Woodworking Plans 125 Blueprints-New $0.99

Medallion Birch Embossed Wood Applique Woodworking $5.99

Hard Maple Lumber, Quarter Sawed Board, Rays End to End, Straight Even Grained $9.75

Hard Maple Lumber, Crotch Wood Flare Section, Curly, Figured, Premium Quality $9.00

Mahogany Lumber, Thick 6/4-, Rift Sawed Board, Premium, Old Stock $20.50

Red Oak Lumber, Quarter Sawed Board, Flakes, Clear, Beautiful, Top Quality $6.25

Red Oak Lumber, Quarter Sawed Board, Flakes, Clear, Beautiful, Top Quality $9.75

Walnut Lumber, Quarter Sawed Board, Rays, Clear, Straight Grained, Top Quality $7.25

White Oak Lumber, Instant Antique Board, Thick 5/4+, Quarter Sawed, Flakes $7.00

Lot of 20 WOODWORKING type MAGAZINES from 1990’s $4.99

White Oak Lumber, Quarter Sawed Board, Flakes End to End, Clear, Super Good One $8.00

White Oak Lumber, Thick 5/4-, Quarter/Rift Sawed Board, Rays, Top Quality $9.75

White Oak Lumber, Quarter Sawed Board, Flakes End to End, Clear, Beautiful $7.50

White Oak Lumber, Instant Antique Board, Quarter/Rift Sawed, Beautiful $9.75

White Oak Lumber, Tiger Striped/Curly Board, Quarter Sawed, Super-Super Good One $17.75

200 BRASS PLATED FINISHING WASHERS #6 Cup Washers $6.95

Red Oak Lumber, Thick 7/4-, Quarter/Rift Sawed Board, Clear, Rays, Appalachian $6.50

White Oak Lumber, Quarter Sawed Board, Flakes End to End, Clear, Burr White Oak $8.00

1907 Rustic Outdoor Furniture Carpentry Book on CD $8.97

Woodworking/Hobby/Garage Workbench Plans $2.50

25 x 1 1/2″ WOODEN KNOBS | BULK LOT CABINET DRAWER HARDWARE PULLS HANDLES CRAFT $12.95

300 WOODEN 1 1/2″ KNOBS LOT | CABINET HARDWARE PULLS | BULK FURNITURE SUPPLIES $38.95

Vintage Woodworking, furniture, home improvement manual one lot of 4 magazines $4.99

Hard Maple Lumber, Clear, 2 Flat Sawed Boards, Straight Grained, Clear $9.50

Hard Maple Lumber, Thick 6/4, Flat Sawed Board, Straight Grained, Super Good One $9.75

Hickory Lumber, Thick 6/4-, Flat Sawed Board, Clear, Straight Grained, Premium $9.00

Mahogany Lumber, Thin, Scroll Wood, Flat Sawed Board, Clear, Super Good One $7.50

Dowel Rod, 9/4 Ash, Golden Oak Finish Straight Grained $9.99

Red Pine Lumber, Thick 8/4-, Wide, Flat Sawed Board, Straight Grained, Beautiful $9.00

Walnut Lumber, Square Stock Board, Turning Wood, Clear, Straight Grained $9.00

Walnut Lumber, Thick 8/4+, Flat Sawed Board, Clear, Straight Grained, Excellent $6.75

Walnut Lumber, Thick 5/4-, Crotch Wood Section, Flare, Curly, Figured, Wide $20.50

White Oak Lumber, Tiger Striped Board, Curly, Quarter Sawed, Flakes $7.50

White Oak Lumber, Thick 5/4-, Flat Sawed Board, Clear, Straight Grained $7.00

White Oak Lumber, Quarter Sawed Board, Flakes, Straight Grained, Light Curl $9.75

White Oak Lumber, Quarter Sawed Board, Flakes, Straight Even Grained, Super $9.75

White Oak Lumber, Quarter Sawed Board, Flakes, Straight Even Grained, Super $9.75

White Oak Lumber, Long, Quarter/Rift Sawed Board, Loaded with Flakes, Premium $9.75

Red Oak Lumber, Thick 5/4-, Quarter Sawed Board, Clear, Straight Grained, Flakes $8.75

Antique Reclaimed Barnwood $5.00

Cherry Lumber, Flat Sawed Board, Clear, Straight Grained, Top Quality $6.00

Walnut Lumber, Thick 8/4-, Crotch Wood Section Flare, Figured, Rich Medium Color $6.25

5000 Bostitch Staples 5/8G 5/16 Crown 18ga Woodworking $9.99

5000 Bostitch Staples 3/4G 5/16 Crown Woodworking $10.99

10,000 Staples 5/16″Crown 5/8″ Leg Woodworking Hardware $12.99

Cedar Board Lumber Wood $1.30

Walnut Lumber, Quarter Sawed Board, Rays, Clear, Rich Color, Top Quality $6.00

Basswood Lumber, Thick 15/4 Carving Wood, Turning wood, Clear, Excellent Quality $9.50

Cherry Lumber, Thick 11/4-, Square Stock, Turning Wood, Clear, Super Good One $9.75

Cherry Lumber, Thick 12/4+, Flat Sawed Board, Clear, Straight Even Grained $9.75

Cherry Lumber, Thick 12/4, Flat Sawed Board, Clear, Straight Even Grained, Super $11.75

Cherry Lumber, Thick 8/4-, Super Wide Board, Curly, Flat Sawed, Super-Super $12.25

Hard Maple Lumber, 5/4-, Flat Sawed Board, 100% White Wood, Super-Super Good One $9.75

Hard Maple Lumber, 8/4-, Wide Flat Sawed Board, White Wood, Super-Super Good One $9.75

Walnut Lumber, Thick 7/4-, Super Wide, Flat Sawed Board, Top Quality, Beautiful $15.50

White Oak Lumber, Quarter Sawed Board, Loaded with Large Flakes, Beautiful $9.75

White Oak Lumber, Quarter Sawed Board, Flakes, Light Curl, Swamp White Oak $11.75

White Oak Lumber, Long, Premium Tiger Striped Board, Curly, Absolutely Beautiful $15.75

VINTAGE Practical Projects Things to Make Woodworking Delta Milwaukee Book 2 $9.99

WOODWORKING PROJECTS—-Sunset Books, 96 pages from 1981 $1.99

6 Woodsmith Magazines #31-36 1984 Complete Year Notes From The Shop Woodworking $9.95

347 WOODWORKING PATTERNS from 1991, 160 pages $1.99

25 ESSENTIAL PROJECTS for YOUR WORKSHOP, from Popular Woodworking,128 pages2000 $1.99

Architecture carpentry woodworking house floor plans CD $9.99

Craftsman Building/Woodworking Plans 125 Blueprints-New $1.49

White Oak Lumber, Instant Antique, Quarter Sawed Board, Flakes End to End, Clear $7.25

White Oak Lumber, Swamp White Oak, Rift/Flat Sawed, Straight Grained, Beautiful $7.25

Poplar Lumber, Tulip, Square Stock Board, Turning Wood, Clear, Premium $9.75

White Oak Lumber, Thick 5/4-, Flat Sawed Board, Clear, Excellent Quality $6.00

Craftsman Building/Woodworking Plans 125 Blueprints-New $0.99

Hard Maple Lumber, Quarter Sawed Board, Rays End to End, Top Quality, Excellent $9.75

Hard Maple Lumber, Long, Rift Sawed Board, Clear, Straight Even Grained, Premium $8.75

Hickory Lumber, Flat Sawed board, Straight Grained, Medium Textured, Beautiful $7.50

Hickory Lumber, Quarter Sawed Board, Rays End to End, Super Good One $9.50

Red Oak Lumber, Long, Quarter Sawed Board, Flakes End to End, Super Good One $12.75

Red Oak Lumber, Super Wide Board, Instant Antique, Flat Sawed, Beautiful $9.75

White Oak Lumber, Thick 7/4 Board, Rift Sawed, Clear $4.73

Walnut Lumber, Flat Sawed Board, Beautiful Medium Walnut Color Heartwood $6.75

Walnut Lumber, Curly, Thick 6/4+, Flat Sawed Board, Clear, Absolutely Beautiful $7.25

Walnut Lumber, Thick 8/4-, Quarter Sawed Board, Clear, Straight Grained, Premium $9.00

White Oak Lumber, Long, Rift Sawed Board, Straight Even Grained, Super Good One $9.50

White Oak Lumber, Tiger Striped/Curly, Quarter Sawed Board, Flaked & Curly $11.75

Red Oak Lumber, Thick 5/4+, Quarter Sawed Board, Flakes End to End, Super $9.00

Hickory Lumber, Thick 5/4-, Flat Sawed Board, Wide, Beautiful, Top Quality $9.50