Fine Woodworking Project Plans

One of the most important things for the novice wood worker who wants to make this a permanent hobby, is to keep your tools clean and in good repair. If you use dull or rusted tools, you work will turn out sloppy and you will most likely not want to continue to fine tune your skills. Orderliness and carefulness, with knowledge and patience, are sure to bring good results, just as a lack of them will bring failure.

Good workers take pride in keeping their workbenches in good order as well. Tools that are not in immediate use should be placed in their racks so they will not be damaged or cause injury to the worker. If the business end of the tool is touched, it should be wiped off to prevent corrosion.

Now that you know how to take care of your tools, let`s put them to work. But what should you make? A custom picture frame is a good thing for the beginning woodworker and will also make a nice gift for that special someone.

The first thing is to determine what size you want your woodworking project to be. Be sure that the inside or a hole` is the size of the picture. If you plan on putting a picture in the frame, the outside edges need to be bigger than that.

Now, for the material to be used in your woodworking project. Since you are doing a picture frame, you can use just about any wood you would like, whether it is picture frame molding that can be bought at local craft stores, builders molding or even just lumber from the lumber yard. The latter you can pick up at your favorite home improvement store. For the beginner or the more advanced woodworker, picture frame molding may be the best choice as it comes with the grove for the glass already cut. With the other two options, you will have to do this groove yourself with a router.

After you have your material and sharp, clean tools, you are ready to start your woodworking project. Now, using a hand saw, cut the material four lengths, one for each side. Cut the edges at a forty five degree angle be sure you measure for this when cutting. Now, lay them on a flat surface and arrange the pieces so they form the shape of the frame that you want. Now, join the corners using wood glue and corner clamps. This is done easily by applying the wood glue to the cut edges, then using the corner clamps to keep them tight while the glue is drying.

The next step is to turn the woodworking project over so it is upside down and put two V nails through the glued joints. This will give the frame more sturdiness for longer a longer shelf life.

Now, just let it finish drying overnight. In the morning, you can do any sanding and staining that you want.

Of course, this is an example of a basic woodworking project. With time and practice, you will get to the level of making chairs, coffee tables, beds and dressers.

About the Author:

You Can Now Master The Art Of
Woodworking And Make Amazing
Pieces Like A True Craftsman!

FREE For A Limited Time

http://www.woodworkingprojects.org/

Article Source: ArticlesBase.com – Who Else Wants To Learn How To Complete Different Wood Working Projects

When marketing consultants are hired for a project, it’s common for both the consultant and client to come up with new ideas along the way. But beware of “scope creep”: those little changes to the scope of a project that ultimately add up to a big change of direction – and a big impact on the budget.

As a marketing consultant, you want to be sure that as a project’s scope grows, your compensation grows accordingly. At the same time, you want to avoid simply saying “no” and risking strained relations with your client. That’s why it’s so important to clearly establish the project’s initial scope, as well as a formal scope-change control process for revising the plans once work is under way.

Staying a step ahead of scope creep’s cost and deadline implications helps keep your project on-time and within budget, while a formal process for managing project changes ensures that all stakeholders have a fair chance for their ideas to be considered.

Creating a logical change-management methodology also opens the lines of communication among team members and gives them a way to report any problems they see popping up during the course of a project. It also demonstrates that all stakeholders’ contributions are valued, while helping you maintain control over the project and the resources dedicated to it.

Where to Begin?

The first step is to create a written definition of exactly what’s included in your project, and what isn’t. By outlining the boundaries of the project’s scope for all team members, you establish a baseline from which the entire team will work.

Once your project scope document is in place, you need to create a scope-change control process that will allow all project stakeholders to submit any suggestions that fall outside that scope. The process should include a formal methodology for assessing each scope change request, as well as for implementing any approved changes. You’ll need to establish this process before work actually begins – ideally, early in the project analysis and planning phase.

People and Processes

When creating a change-management process, it’s a good idea for marketing consultants to delegate some of the responsibilities by creating a “change-control board” that will evaluate suggested project scope changes. The board chairperson will have the authority to make final decisions regarding proposed changes, and will also be responsible for assigning duties to others, such as evaluating change requests and implementing approved changes.

Then, you’ll need to create a process for team members to submit their suggestions or concerns to the project’s change-control board, which will need a spreadsheet or database to track each change request and its status, time and resource requirements, as well as other notes.

Here’s how it typically works: When a team member submits a change request to the board, the chairperson assigns someone to assess the idea’s pertinence to the project, feasibility, quality impact, time and resource requirements, potential risk, and other factors. Based on this person’s assessment, the board can either seek out more information or decide whether or not to implement the change.

Giving Changes the Green Light

Unless the board-approved project change is very small, you may wish to present it to the client before moving ahead with implementation, especially if it involves additional expense, time or human resources.

Once the client has signed off on the change, the board chairperson can assign the implementation to the right person. As the marketing consultant, it’s your job to revise the project schedule; juggle project commitments with all affected team members; and keep all stakeholders informed of the impact of the change on deadlines, budgets or other project plans.

Although it may seem like a lot of work up-front, creating a formal process to head off scope creep helps you keep your client aware of how a project grows and changes over time, and ensures that you’re paid for any extra work that arises as a result of the scope changes. Plus, a formal change-management process provides a complete impact analysis for any suggested change, helping to identify and reduce risk for marketing consultants.

Instructional Video-Fine Woodworking-part 2.

5000 Senco Staples 1/4″ Crown 5/8″ Leg~ Woodworking $11.99

Alder Lumber Thick 8/4- Flat Sawed Board Clear Superior Grade $9.75

Birch Lumber Flat Sawed Board Clear Straight Grained Medium Textured $8.25

Cherry Lumber Thick 8/4- Quarter Rift Sawed Board Clear Straight Grained $4.25

Hard Maple Lumber Thick 8/4 Carving Turning Wood Flat/Rift Sawed Board $3.00

Hard Maple Lumber Square Stock Board Turning Wood 100% White Wood Premium $8.50

Hard Maple Lumber Thick 10/4 Flat Sawed Board Clear Straight Grained $9.75

Poplar Lumber Tulip Thick 8/4 Rift Flat Sawed Board Clear Straight Grained $7.75

Red Oak Lumber Thick 8/4- Quarter Sawed Board Flakes Clear Top Quality $9.50

Red Oak Lumber Thick 8/4- Rift Sawed Board Clear Appalachian Red Oak $9.50

Walnut Lumber Square Stock Board Turning Wood Clear Rich Medium Color $6.00

Walnut Lumber Thick 6/4- Flat Sawed Board Clear Straight Grained Super Good $7.50

White Oak Lumber Super Wide Board Quarter Sawed Flakes Clear Top Quality $9.25

Craftsman Building/Woodworking Plans 125 Blueprints-New $0.99

White Oak Lumber Quarter Sawed Board Flakes Clear Premium Burr White Oak $8.75

Poplar Lumber, Tulip, Flat Sawed Board, Clear, Straight Grained, Beautiful $8.75

Red Oak Lumber Wide Flat Sawed Board Clear Pennsylvania Appalachian $9.00

200 Brass Plated 1/2″ inch #6 countersunk slightly domed head slotted screw $6.95

Sycamore Lumber, Thick 8/4+, Flat/Rift Sawed Board, Clear, Excellent Quality $5.93

Cherry Lumber, Thick 8/4 Board, Flat Sawed, Clear, Straight Grained, Super $7.93

Ash Lumber, Flat Sawed Board, Clear, Straight Grained, Excellent, Old Stock $7.93

100 – 3/4″ Wooden Round Head Plugs/Furniture/Cabinets/Flooring/Woodworking $6.95

White Oak Lumber Quarter Sawed Board Flakes Clear Straight Grain Premium $3.75

NEW CSH Woodworking Screws 8-32 x 1-1/4 Zinc #2 Phillips Combo LOT 2000 Pieces $20.00

Cherry Lumber Quarter Sawed Board Rays Clear Straight Grained Rich Color $3.25

Cherry Lumber Quarter Sawed Board Rays Clear Straight Grained Rich Color $9.75

Cherry Lumber Thick 10/4 Flat Sawed Board Curly Clear Top Quality $9.75

Elm Lumber Gray Super Wide Flat Sawed Board Clear Beautiful Grain Pattern $9.75

Hard Maple Lumber Quarter Sawed Board Wide Rays End to End Beautiful $7.50

Walnut Lumber Thick 8/4+ Flat Sawed Board Straight Grained Excellent Quality $4.75

Walnut Lumber Curly Thick Wide Flat Sawed Inclusions Absolutely Beautiful $7.50

Spanish Cedar Lumber Thick 7/4 Rift Sawed Board Clear Top Quality $8.00

White Oak Lumber Instant Antique Thick 5/4 Quarter Rift Sawed Board Rays $5.00

White Oak Lumber Quarter Rift Sawed Board Rays Light Brown Color Beautiful $7.75

White Oak Lumber Quarter Sawed Board Flakes End to End Light Brown Beautiful $9.00

Red Oak Lumber, Square Stock Board, Turning Wood, Clear, Beautiful Appalachian $3.95

Time Life Home Repair Do it yourself Walls, Ceilings and Woodwork $1.99

12 PC SET,CAST IRON,LONGHORN,DRAWER PULLS,WOODWORKING,FURNITURE REFINISHING $19.98

4 New Beautiful Cabinet Maple Wood Samples for Woodworking & Craft Projects $20.00

(120) Furniture Connector Bolts Nuts Woodworking Hardware New Bagged Screws $30.00

Woodworker’s Tool Guide Getting the Most from Your Hand Tools Power Tools & Acc $18.50

American Woodworker Shop Tips IBS 076210189x Softcover 312 pages $18.50

Craftsman Building/Woodworking Plans 125 Blueprints-New $0.99

Parrot Industries 8 PC Child Modular Gym Play Building Set Wood Working Plans $10.99

WOODWORKING PLANS MEGA COLLECTION OVER 200 PLANS ON CD $6.99

Hard Maple Lumber Long Flat Sawed Board Straight Grained Top Quality $9.75

Hickory Lumber Quarter Rift Sawed Clear Straight Even Grained Super Good One $9.75

Honey Locust Lumber Quarter Rift Sawed Board Rays Light Golden Red Color $9.75

Mahogany Lumber Super Wide Board Flat Sawed Clear Old Stock Super Good One $9.50

White Oak Lumber Rift Flat Sawed Medium Textured Beautiful Excellent Quality $9.75

Red Cedar Lumber Eastern Aromatic Quarter Flat Sawed Straight Grained $6.75

White Oak Lumber Quarter Rift Sawed Board Flakes End to End Super Good One $9.75

White Oak Lumber Quarter Rift Sawed Board Flakes End to End Super Good One $9.00

White Oak Lumber Tiger Striped Curly Wide Quarter Sawed Board Flakes Premium $29.00

White Oak Lumber Thick 5/4 Quarter Sawed Board Flakes End to End Super Good $9.75

Basswood Lumber, Carving Wood, Straight Grained, Soft Textured, Beautiful $4.73

Ash Lumber, Flat Sawed Board, Clear, Straight Grained, Excellent, Old Stock $6.93

25 x 1 1/2″ WOODEN KNOBS | BULK LOT CABINET DRAWER HARDWARE PULLS HANDLES CRAFT $12.95

300 WOODEN 1 1/2″ KNOBS LOT | CABINET HARDWARE PULLS | BULK FURNITURE SUPPLIES $39.95

VINTAGE JORGENSEN WOODWORKING ADJUSTABLE WOOD CLAMP $9.99

Wire Brads, 1 Lb 18 Gauge 5/8″ Nails, Woodwork, Crafts $5.99

Hard Maple Lumber Thick 5/4- Flat Sawed Board Clear Face Side $7.00

Hard Maple Lumber, Long, Rift Sawed Board, Clear, White Wood, Top Quality $9.50

Mahogany Lumber Thick 5/4 + Flat Sawed Board Clear Straight Grained $7.25

Red Oak Lumber Inclusions Quarter Rift Sawed Rays Beautiful $9.75

Red Oak Lumber, Instant Antique, Quarter/Rift Sawed Board, Rays End to End $9.25

Red Oak Lumber, Quarter Sawed Board, Flakes End to End, Absolutely Beautiful $7.75

Walnut Lumber, Rustic, Rift/Quarter Rough Sawed Board, Holes, Knots, Inclusions $7.75

White Oak Lumber Rift Sawed Board Clear (Select) Straight Grained Premium $9.75

White Oak Lumber Thick 6/4- Quarter Sawed Board Flakes Premium $9.00

White Oak Lumber, Rift Sawed Board, Straight Grained, Medium Sand Color, Premium $9.00

White Oak Lumber, Rift/Flat Sawed Board, Straight Grained, Instant Antique $9.75

Maple Lumber, Solid Maple Arch, Beautiful Piece $11.33

Drawer Sides, Pine, Routed Bottom Slot, Pack of 10 $15.00

Shelf Board, Project Wood, Thick Pine, Light Color $7.21

Table Top, Oval Shape, Unfinished Frame $20.00

12 PC SET,CAST IRON,LONGHORN,DRAWER PULLS,WOODWORKING,FURNITURE REFINISHING $19.98

Rail Cap, Soft Maple, Curved, Clear, Straight Grained $9.25

1000 1/2″ , 3/4″ OR 1″ PAN HEAD WASHER POCKET SCREWS~WOODWORKING $9.99

Brainerd 9715 Solid Brass Broad Hinges (Furniture/Cabinets/Crafts/Woodwork) $6.75

Stanley 74-4200 Satin Brass Finish Cabinet Hinges (Furniture/Crafts/Woodwork) $6.25

Brainerd 18XC Solid Brass Hinges (Furniture/Crafts/Cabinets/Woodwork) $7.50

National V485 Cabinet Hinges 1-1/4 Nickel Finish (Furniture/Crafts/Woodwork) $6.50

Stanley 72-4900 Ornamental 2 Cabinet Hinges (Furniture/Crafts/Woodwork) $6.75

Brainerd Solid Brass 2 Cabinet Hinges (Furniture/Crafts/Woodwork) $7.25

Stanley 72-2800 Ornamental Cabinet Hinges (Furniture/Crafts/Woodwork) $6.75

FLAT HEAD WOOD SCREWS~FURNITURE HARDWARE~WOODWORKING $8.50

Cherry Lumber, Thick 6/4-, Quarter Sawed Board, Straight Grained, Top Quality $7.75

Hard Maple Lumber, Flat Sawed Board, Clear, Medium Textured, Beautiful $7.75

Hard Maple Lumber, Flat Sawed Board, Clear, Straight Even Grained, Top Quality $9.00

Hard Maple Lumber, Flat Sawed Board, Clear, Straight Grained, Beautiful $8.50

Hard Maple Lumber, Thick 6/4, Clear, Rift Sawed Board, Excellent Quality $8.75

Red Oak Lumber, Flat Sawed Board, Top Quality, Premium Pennsylvania Appalachian $9.75

Red Oak Lumber, Instant Antique, Quarter Sawed Board, Flakes, Beautiful $7.25

Walnut Lumber, Square Stock Board, Turning Wood, Clear, Straight Even Grained $9.75

White Oak Lumber, Premium Flat Sawed Board, Clear, Straight Grained, Top Quality $7.50

White Oak Lumber, Thick 5/4+, Quarter Sawed Board, Nicely Flaked, Excellent $8.00

Drawer End, Pack of 10, 7/16″ Thick $12.50

Drawer Divider, End, Side, Solid Maple, Pack of 10 $12.50

Cabinet Door, Maple, Arched Top, Maple Construction $14.00